Only the highest quality additives are used in the r.s.p. HOT MELT CHAIN WAX:

Such as tungsten sulphide (WS2). Tungsten sulphide has an incredibly low coefficient of friction of 0.03 better than Molybdenum, PTFE or even wet ice on wet ice! Increases powertransmission and reduces wear. Very low friction works over awide temperature range from -270 C to +650 C

Application:

The chain must be completely cleaned of oil and grease. Werecommend our chain cleaner r.s.p. Jacky Chain or r.s.p. BrakeCleaner.
Heat the Hot Melt Wax (melting point approx. 95C).When the wax is completely liquid, hang the chain on a wire hookand dip it into the liquid wax bath. Move the chain in the bath; airbubbles may rise. After about 10-15 minutes, remove the chain and let it drip over the bath. Then hang it up to dry for at least12 hours. Proceed in the same way with the chain lock. After dryingcompletely, reinstall the chain.

RSP-062068001 – WAX Melting device

Capacity: 500 ml
Voltage: 220-250V
Frequency: 50/60 Hz