Snap on the Single Welt Cord Foot to easily, quickly, accurately make and insert welted cording into your upholstered and home dec projects. Whether the welt cord is purchased pre-covered or you cover it yourself, this accessory foot gives you a professional finish. It sews like the piping foot but is designed for larger sizes of cording.

How to Use:

To cover welt cording:

1. Use ” (6 mm) Cotton Filler Cord. Cut strips of bias or cross grain fabric wide enough tocover the cord plus seam allowance.
2. Snap on the Single Welt Cord Foot. Select center needle straight stitch, stitch length 3. Place the cording on the wrong side of the fabric strip and wrap the fabric strip aroundthe cord.
3. Place the fabric and cord under the Single Welt Cord Foot with the cording in thegroove on the underside of the foot.
4. Sew to cover the cording with the fabric.

To stitch covered welt cord into a seam:

1. Snap on the Single Welt Cord Foot. Select center needle position straight stitch, stitchlength 3.
2. Place the covered welt cord on the right side of the fabric along the seam line. Place itunder the Single Welt Cord Foot with the welt cord in the groove of the foot. Stitch thewelt cord to the fabric. Clip the seam allowance of the welt cord at curves and corners.
3. Place the second piece of fabric right sides together with the first. The welt cord will bebetween the two layers. Place the welt cord in the groove and stitch with the first stitchingline up. Touch the width to adjust the needle position slightly to the right to cover thefirst stitching